Full Fat Audio FFA 10000 MK 2

£3,050.00

Full Fat Audio FFA 10000 MK 2

£3,050.00

Full Fat Audio FFA10000 MK 2  - (Improved) Dual power dual mono professional audio amplifier

Ideally suited for driving very high output bass and sub bass loud speakers or high power full range systems. Designed to drive sustained, very high output audio into 2 Ohm loads. Featuring FFA proprietry Class D PWM amplifiers. These are partnered with FFA high current switch mode PSU technology. Massive bulk storage capacitance per channel ensures continuous high power deliver to the load. The FFA-10000 is dual mono - each channel is totally independent. FFA dual mono power amplifiers are mains supply power efficient and operate cool even in the most demanding environments. Mechanical construction is tour grade with aluminium used throughout the chassis design. This provides a robust and rigid but lightweight housing for the electronic systems.

Features at a glance 
• 2 x 5000 Watts at 2 Ohms 
• FFA Class D PWM amplifiers 
• Power supply soft start 
• High thermal headroom 
• Weight - 12kg 
• Dual mono power amplifiers 
• Clip limiter 
• 5 year factory warranty 
• Hand constructed and designed in England 
• Switch mode power supply 
• Power efficient 
• 2 Ohm drive 
• All aluminium construction 
• Dual power supply

Suitable Applications 
Very high power output amplifiers ideal for the most demanding bass and sub bass reinforcement. 
2x18"/21"/24" very high power bass systems - 2 ohm drive

Specifications 
Power Ratings: 8 Ohms 1500W, 4 Ohms 3000W, 2 Ohms 5000W 
Gain: 32 dB 
THD: Typical 0.05 4 Ohm 1kHz THD+N 
Frequency Response 20Hz - 20kHz 
Controls: Power on rocker switch each channel. 40 point Potentiometer each channel 
Indicators: Power `on' green LED each channel, Signal present green LED, -3dB drive yellow LED, amplifier clip - red signal LED, 
amplifier protect due to over temp/clip limiter activated and 3 second mute at power up = red LED 
Cooling: Rear to front airflow, high CFM fan 
Load Protection: DC on output, side chain TCA clip limiter circuit 
Amplifier Protection: Short circuit, current overload, thermal, reactive load stability 
Audio Inputs: Neutrik%uFFFD female XLR with male XLR signal link through per channel 
Audio Outputs: Pair of Neutrik%uFFFD NL4MP-UC speakON%uFFFD connectors per channel. Each connector has all output poles live 1+, 1-, 2+, 2-. 
This allows the use of 4 core loudspeaker cable to minimise conductor losses between amplifier and loudspeaker 
Power Supply: 2 x 20A Neutrik%uFFFD powerCON%uFFFD required - one each channel 
Power Requirement: 185-230 VAC 50-60Hz, 2x16A max per amplifier 
Power Operational Range: +-10% 
Dimensions: 2RU 19' rack mount enclosure, H88mm x W483mm x D510mm. Depth includes integral rear rack support ears 
Weight: 12 kg