Fane Sovereign 15-400 15 inch 400w EIA 8 ohm

£79.34

Fane Sovereign 15-400 15 inch 400w EIA 8 ohm

£79.34

Fane Sovereign 15-400 15" 400w EIA 8 ohm
High power 15" driver designed for 2 way pro sound applications. Ideally suited for small sealed floor wedges or medium sized vented boxes. Also suitable for monitors or bass guitar. Usable frequency range: 45Hz - 4kHZ.

The all new FANE Sovereign Series comprises fifteen cone drivers designed for a broad spectrum of sound reinforcement situations. Midrange, fullrange, bass-mid and dedicated bass applications are comprehensively covered.
Featuring heavy duty FANE pressed steel chassis providing rugged durability and consistant performace in even the most demanding of environments, glass fibre voice coils capable of delivering outstanding power handling capabilities and carefully selected cone materials for smooth tonal characteristics and extended bass response, the FANE Sovereign represents an exciting and versatile answer to the demands of a varied and demanding range of audio applications.
ELECTRO ACOUSTIC SPECIFICATIONS:

  • Nominal Chassis Diameter 15"
  • Impedance 8 Ohms
  • Power Handling 400 w (EIA 426A)
  • Peak Power (6dB Crest Factor) 1600 w (EIA 426A)
  • Usable Frequency Range -6dB 40 Hz - 4 kHz
  • Sensitivity (1 w - 1 m) 98.5 dB
  • Moving Mass inc. Air Load 91.54g
  • Minimum Impedance Zmin 6.2 Ohms
  • Effective Piston Diameter 382 mm / 15.03"
  • Peak Displacement Volume of Cone Vd 0.3 litres
  • Magnet Weight 56 oz
  • Magnetic Gap Depth 10 mm / 0.39"
  • Flux Density 1.1 Tesla
  • Coil Winding Height 16 mm / 0.62"
  • Voice Coil Diameter 63.5 mm / 2.5"
THIELE SMALL PARAMETERS:

  • FS Hz 37 Hz
  • RE Ohms 5.2 Ohms
  • Qms 6.5
  • Qes 0.32
  • Qts 0.305
  • Vas Ltr 210
  • Vd litres 0.3
  • CMS (mm/N) 0.202
  • BL T/m 18.6
  • Mms (grms) 91.54
  • Xmax (mm) 3.45
  • Sd (cm2) 855.3
  • Efficiency % 3.205
  • Le (1kHz) 1.6 mH
MATERIALS OF CONSTRUCTION:

  • Former Material Glass Fibre
  • Voice Coil Copper
  • Magnet Material Ferrite
  • Chassis Steel
  • Cone Paper
  • Surround / Edge Termination Polyvinyl Damped Dbl. Half Roll Linen
  • Dust Dome Paper
  • Connectors Solder Tag
  • Polarity Positive Voltage at Red Terminal Causes Forward Motion of Cone
MOUNTING / SHIPPING INFORMATION

  • Overall Diameter 381 mm / 15.00"
  • Flange Height 9 mm / 0.35"
  • Baffle Hole Diameter F/M 352 mm / 13.85"
  • Baffle Hole Diameter R/M 352 mm / 13.85”
  • Gasket Supplied Front & Rear
  • Fixing Holes 8x 6.35 mm on 369.2 mm / 14.56" PCD
  • Depth 162 mm / 6.37"
  • Weight 5.2 kg / 11.46 lb
  • Recommended Enclosure Volume 2.11 - 4.41 cu ft / 60 - 125 litres
  • Shipping Weight 14.21 lb / 6.45 kg
  • Packing Carton Dimensions 220 x 420 x 420 mm