PKN XE10000 1U Class D Amplifier - 2x 5000w

Previous Next

£2,376.75

PKN XE10000 1U Class D Amplifier - 2x 5000w

£2,376.75

PKN XE10000 1U Class D Amplifier - 2x 5000w @ 4 ohms - Only 9.6Kg

XE Series professional amplifiers are designed for portable and fixed installations. Five models are available: XE2500, XE4000, XE5002, XE6000 and XE10000. All type have graphics LCD display and two JOGs for tuning system parameters. The devices have internal webserver for full remote control over standard ETHERNET. There are two possible ways to use the remote control functions: with normal internet browser (JAVA based), and with PKNC control software. 


MAIN FEAUTRES:


- High output power and high efficiency 

- Advanced high frequency switching technology 

- Small size, low weight, ideal for touring applications 

- Networkable amplifier over standard Ethernet 

- AMPControl software and JAVA based control 

- All functions can be accessible by remote 

- Graphics LCD for easy setup and diagnostics 

- Two JOG button for fast navigating 

- Digital volume and input sensitivity control 

- Built-in programmable limiter 

- Output Peak and average Voltage,Current measuring 

- Displays actual load impedance 

- Embedded webserver for set&view parameters by a web browser 

- Five user profiles 

- Intelligent protective functions 

- High frequency resonanat power supply with active PFC function 

- Wide mains voltage operation range 




  •  SPECIFICATIONS:
  • Power requirements = 160V - 270VAC, (50-60Hz)
  • Max. Power Consumption = 8000W
  • Soft starting = YES
  • Power Supply = High frequency resonant includes active PFC
  • Mains connection = Neutrik Powercon NAC3MPA-1
  • Working temperature range = 0 - 40C
  • Storage temperature range = -25C - 60C
  • Output power @ 16 Ohms = 2x 1300W
  • Output power @ 8 Ohms = 2x 2600W
  • Output power @ 4 Ohms = 2x 5000W
  • Output power @ 2.6 Ohms = 2x 3200W
  • Output power @ 2 Ohms = 2x 2900W
  • Minimum load impedance = 2 Ohms
  • Frequency response (+/- 3dB, 8 Ohms) = 5 Hz - 22 kHz
  • Slew rate = 62V /us
  • Damping factor = >700
  • End Stages = High Frequency semi soft switched PWM in balanced configuration
  • Output connections = Four pole Neutrik Speakon NL4MP
  • Signal to Noise ratio A-Weighted 20Hz - 20kHz = 105dB
  • Nominal sensitivity for maximum output level (balanced) = 1.9V (rms)
  • Input Impedance (Referred to ground) = 10 KOhms + 10 KOhms (+/- 1%)
  • Input terminals = Neutrik XLR In and Link-out
  • Built in Limiter = Programmable limiter ( 1V / Step )
  • Output level meter = LED bar, status LEDs (AGR, Short, Temp, Protect, Ready)
  • Display = Graphics LCD
  • Control terminals = JOG Wheels and Buttons
  • Volume control = Set by control JOG wheels or remote -95,5dB - 0dB (in 0,5 dB steps)
  • Input sensitivity = -95.5db - 0dB (steps 0,5 dB)
  • Limiter settings range = 10 - 200V
  • User profiles = 5 user profiles
  • Protections = Short circuit, Overload, Low Impedance, Thermal, DC fault
  • Cooling = Forced air cooling with regulated DC fans
  • Direction of air flow = Front to rear
  • Remote control = 10/100 Mbps Ethernet
  • Weight = 9.6Kgs
  • External dimensions = 19" rack 483 x 440 x 44mm (1 Rack Unit)