P-Audio E15-600S 15 Inch 600W Low Frequency Loudspeaker Driver

Previous Next


P-Audio E15-600S 15 Inch 600W Low Frequency Loudspeaker Driver

Was £129.98 £99.90

P-Audio E15-600S 15 Inch 600W Low Frequency Loudspeaker Driver

P-Audio's truly outstanding E-series drivers represent excellent value for money - and we're so confident in them, we're prepared to back them up with a three year warranty for all of our UK mainland sales. P-Audio's E15-600S has been designed as a high output driver for bass use, and excels in vented bass reflex enclosures. With a lower frequency threshold of 40Hz and 600W of power handling, the E15-600S makes for an excellent all-rounder for bass duties, and is one of our most popular 15" bass drivers.

If you're after a driver with a little more power handling that excels at reproduction of kick bass frequencies for live music, then take a look at the 800W E-15LF - and if you thought that a high-performance 18" driver that can push bass right down to 30Hz was out of your budget, then try out the E18-400S - one of the most pocket-friendly 18" professional-standard audio drivers we've ever been able to offer, with a performance that's hard to believe for the price.

The P Audio E15-600S is a very high output low frequency transducer. The E15-600S is an upgraded design that features many of P Audio's new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at low frequencies and is ideal for high level full range response in both live sound and recorded music venues. The E15 600S is an excellent choice as a low frequency component in a professional two way system design. The operating bandwidth of the E15-600S is 40Hz to 2000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.

The E15-600S employs a large format 4 inch (101.6mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The large voice coil diameter and very high power handling make this transducer and excellent choice for ultra high performance professional sound reinforcement systems. The E15-600S utilizes P Audio's under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil.

The voice coil design is a bobbin wound geometry with P Audio's precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that ensures a very high degree of structural integrity.


  • Nominal diameter15"
  • Power rating600 W(AES)
  • Nominal impedance8
  • Sensitivity95 dB
  • Chassis typeHeavy Duty Stamp Steel
  • Magnet typeFerrite
  • Magnet weight3.56 kg/ 125.7 oz
  • Voice coil diameter 99.3 mm/3.9 in
  • Coil materialSV-W
  • Former materialGlass fiber
  • Cone materialPaper
  • Surround materialCloth
  • SuspensionSingle
  • X-max6.5 mm/0.26 in
  • Gap depth12 mm/0.47 in
  • Voice coil winding width25 mm/0.98 in
  • Net Weight12.1 kg/29.1 lb
  • Packing Dimension WxDxH430 x 430 x 220 mm
  • Shipping Weight13.2 kg/29.1 lb

Thiele Small Parameters:

  • Re5.6 Ohm
  • Fs44 Hz
  • Mms124.54 g/4.39 oz
  • Mmd110.16 g/3.89 oz
  • Qms8.51
  • Qes0.49
  • Qts0.46
  • Vas110.48 lt/3.90 cu ft
  • BI19.82 Tm
  • Cms1.1e-04 m/N
  • Rms4.02 Ns/m
  • Le (at 1kHz)1.13 mH
  • Sd 855cm2